Sensors
Fluid sensors
SICK

Pressure sensors LFH The level probe LFH is a precise pressure transmitter for continuous level measurement. The liquid column above the probe creates a hydrostatic pressure which is a direct indicator for the liquid level. Through its permanently connected
cable the LFH is submerged into the liquid to be monitored. Thus, the container wall does not need to be disturbed to fit a level sensor.

Enables level measurement under difficult conditions where other measurement technologies fail
No openings required in the wall of the vessel
For cleaning purposes the probe can easily be taken out of the liquid
High reliability through rugged design and robust materials ขอใบเสนอราคา

Level sensors LFP Cubic Rugged design increases service life
High flexibility due to cutable and exchangable monoprobe
Cost savings due to multiple output signals: one system for both level detection and continuous level monitoring
Time and cost savings due to low maintenance and quick commissioning
No calibration or recalibration required for commissioning, thus saving time and costs
Compact and rotatable housing ensures flexible installation
No crosstalk when several sensors are mounted next to each other
Advanced technology enables adjustment-free measurement of oil- and water-based liquids ขอใบเสนอราคา

Level sensors LFP Inox Robust design increases service life
High flexibility due to retractable probe and interchangeable connection concept
Cost savings due to multiple output signals: one system for both level detection and continuous level monitoring
Time and cost savings due to low maintenance and quick commissioning
No calibration or recalibration required for commissioning, thus saving time and costs ขอใบเสนอราคา

Level sensors UP56 Ultrasonic Level Sensor: tough, non-contact, pressure-resistant

Non-contact level measurement up to 3.4 m operating distance / 8.0 m limit scanning distance
Pressure resistant up to 6 bar (87 psi)
Transducer protected by PVDF cover for increased resistance
3-in-1: continuous level measurement, level switch and display
Analog output switchable between 4 … 20 mA and
0 …10 V
Process connector thread G 1 and G 2
IP 67 enclosure rating
Easy to set parameters, also via connect+ ขอใบเสนอราคา

Level sensors MHF15 Simple, compact and robust

Robust level monitoring in liquid media without additional requirements
Small, compact design, no medium calibration required
Process temperature up to 55 °C, process pressure up to 16 bar
Enclosure rating IP 67 and IP 69K
Process connection G ½
Highly resistant thanks to stainless steel housing 1.4404, polysulfone apex
Output available as PNP or NPN transistor
FDA-compliant, UL ขอใบเสนอราคา

Level sensors UP56 Pure Ultrasonic Level Sensor: Pure reliability

Ultrasonic level sensor with very high chemical resistance
Non-contact measurement in immersion pipe of up to 1500 mm
PTFE-coated membrane and GF D40 process connection made of PTFE
Pressure resistant up to 6 bar, temperature resistant up to 85°C
Different sizes available
Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
Switching output for monitoring the maximum and minimum limit ขอใบเสนอราคา

FFU flow sensor - non-contact flow measurement Flow sensor for conductive and non-conductive liquids
Compact design with no moving parts
Process temperature up to 80 °C, process pressure up to 10 bar
High chemical resistance due to seal-free sensor design
Large display with membrane keyboard
Integrated teaching tube detection ขอใบเสนอราคา

pressure switch PBS with IO-Link The electronic pressure switch PBS is designed for pressure monitoring and measurement in liquid and gaseous media. It is pressure switch, transmitter and display in one and the same device. In its standard configuration it has two switching points. In addition, there are configurations available with one or two switching points and an analog output signal.
The intuitive setup with the three large buttons and the integrated display are according to the recommendation 24574-1 of the German engineering federation VDMA.

The display and the electrical connector can be rotated against the process connector and against each other to allow well visible display orientation and clean cable routing.
The PBS has a circularly welded stainless steel membrane. Hence, it is well suited for a large variety even of corrosive media.
A large multitude of customary process connectors is available as standard.

Compact and robust design
Rotatable housing for flexible installation
Safe and simple operation and set-up with three large buttons and well legible display
Wide application range
Insensitive against corrosive media through hermetically sealed stainless steel membrane
Cost reduction through IO-Link ขอใบเสนอราคา

PFT flexible pressure transmitter The pressure transmitter PFT is designed for pressure measurement in liquid and gaseous media. The PFT targets industrial applications such as in machine and plant engineering, in machine tool systems, in hydraulic and pneumatic systems, for pressure control systems and for pumps and compressors.
The PFT has a very good measurement accuracy across the entire operating temperature range. A version with an extended temperature range up to 150°C is optionallyavailable upon request.
There is a large multitude of customary process connectors available as standard.
The pressure in specific media such as sludges, slurries, pulp or highly viscous liquids can be measured through an optionally available flush-mounted stainless steel membrane.

Wide application range
High accuracy across wide temperature range
Large number of configurations possible to meet customer requirements
No moving parts: No mechanical wear, fatigue-proof, maintenance-free
Insensitive against corrosive media through hermetically sealed stainless steel membrane
Quick and simple installation ขอใบเสนอราคา

temperature measurement - TBT Pt100 element, accuracy class A according to IEC 60751
Measuring ranges –50 °C … +150 °C and –50 °C … +250 °C
Wetted parts made from corrosion resistant stainless steel 1.4571
Various mechanical adaptations and insertion lengths
Pt100 (4-wire) or 4 mA … 20 mA (2-wire)
Cable gland M16 x 1.5 ขอใบเสนอราคา

TCT - temperature measurement Pt100 element, accuracy class A according to IEC 60751
Measuring ranges –50 °C … +150 °C and –50 °C … +250 °C
Wetted parts made from corrosion resistant stainless steel 1.4571
Various mechanical adaptations and insertion lengths, also available with thermowell
Pt100 (4-wire) or 4 mA … 20 mA (2-wire)
Circular connector M12 x 1 (IP 67) or L-connector according to DIN EN 175301-803 A (IP 65) ขอใบเสนอราคา

Temperature switch TBS Large display
Individually programmable transistor outputs PNP or NPN, optional analog output 4 mA ... 20 mA or 0 V ... 10 V
Measuring range –20 °C … +80 °C
Pt1000 element, accuracy class A (IEC 60751)
Wetted parts made from corrosion-resistant stainless steel 1.4571 ขอใบเสนอราคา